Client PCs are not finding Nethasp

Client PCs are not finding Nethasp

Net hasp set up to get a computer to see the Net hasp on the sever.


(Click on the image to expand the sizing)



Step 1.) You will first need the IP address of the server




Step 2.)



Step 3.)



Step 4.)



Step 5.) 

  1. Scroll down to find  ;;NH_SERVER_ADDR = <Addr1>, <Addr2>
  2. Remove the semi colons and the <Addr1>, <Addr2>.and replace that with the server I.P. address 
  3.  NH_SERVER_ADDR = 192.168.xx.xx   (this is a generic depiction of an I.P. address #)
  4. Below that is the ;;NH_USE_BROADCAST = Enabled or Disabled, remove the semi colons and the Enabled or.
  5. It should look like this. NH_USE_BROADCAST = Disabled




Step 6.) 
-After completing the necessary changes, close the INI file and open Mastercam

-If you cannot save the file directly into the program files folder, hit save-as and save it to the My Documents folder then copy and paste it from there. This is a work around for the security/permissions. 
​

If you have any questions contact our tech support to walk you through this process

    • Related Articles

    • Setting Up a NetHasp (2021)

      The Nethasp can be setup on any server or PC on your network. From there it will be able to broadcast your Mastercam licenses to any PC on said network. It is important that during setup, you are physically at the Server or PC. Most remote services ...

    • NetHasp Update Process

      Description: Once you have received your permanent/temporary codes, follow the steps below to update your codes. NetHasp Hasp Updating Process: You must be physically at the server (most remote software will not display the NhaspX correctly and will ...

    • Hasp is not Recognized by PC/Server

      Description: When attempting to use a Hasp or NetHasp on a system, the HaspX.exe (or NetHaspX.exe respectively) will not detect the Hasp from the PC it is being hosted from and not open Mastercam. Problem: The Hasp's drivers were likely not installed ...

    • How Mastercam Licenses can Work Remotely

      Due to extenuating circumstances, companies may occasionally need to close their physical offices and move to a work-from-home environment. This change can create new challenges, one of which is how to run Mastercam when you are no longer in the ...

    • Online 1st Activation/Update Instructions

      Online Activation Instructions Description: Use this guide for initial activation or for updating codes using the online activation method. Once you have received your Wibu codes, follow the steps to update your Wibu license Online. If Codemeter and ...